Skip to content
MakePixel

Draw 13 tiles. Get all 47.

Paint an island and a hole, and MakePixel builds the rest of the autotile set and checks the seams. Then paint whole levels with it and send them to Godot or Tiled.

  • Free to start
  • Nothing to install
  • Desktop, tablet and phone
Bram's IsleLive demo
tiles in an autotile set
47
tiles you draw
13
kinds of map layer
3
pixels a tile, for autotile sets
16–64
How it works

From blank canvas to your game.

  1. 01

    Start a tileset

    Press N on the canvas, choose Tileset and pick a template and the tile size your game uses.

  2. 02

    Paint the key tiles

    An island, a hole and the fill. Tiled Mode shows how they repeat.

  3. 03

    Build the set

    Choose Build tileset to get all 47 tiles, and fix any seams outlined in red.

  4. 04

    Paint a map and export

    Paint the level with your terrain, then export it for Godot or Tiled.

    Command E
Tiles and tilesets

Start with the right template.

A tile is one square that repeats seamlessly. A tileset is a sheet of connected tiles for building maps. Pick a template and it starts with placeholder tiles that already work on a map, so you can paint over them one by one.

How to

  1. Press N on the canvas, choose New image, then Tile or Tileset.
  2. For a tileset, pick a Template. Terrain · 4 tiles is the default. Terrain · 13 tiles, Platform · 13 tiles (side view) and Corners · 16 are there too, and Free grid gives you Columns × Rows.
  3. Set the Tile size to 16, 32, 48 or 64.
  4. Draw. A tile shows repeating around itself while Tiled Mode is on, so you see the seam as you paint.
  5. Already have an image on the canvas? Right-click it and choose Convert to tile, Convert to tileset… or Convert to autotile set.

Tip Single tiles and free grids go up to 256 pixels. Autotile sheets stop at 64.

Autotile

The whole set from a few tiles.

In the 13-tile template you draw an island, a hole and the fill, and MakePixel builds all 47 tiles from them, so terrain joins up whatever shape you paint. It also checks every edge and outlines the ones that don't meet.

How to

  1. Paint the 3×3 island under the sheet (centre, sides and corners), the 2×2 hole for the inner corners, and the fill. The 4-tile template needs only four tiles and the fill.
  2. Choose Build tileset in the right panel. You get all 47 tiles plus the fill, in 8 columns by 6 rows.
  3. Read the panel. It says No seams, or Seams with a count, and outlines those tiles in red, a gap where a tile should be solid or edges whose colours don't match.
  4. Touch up any tile by hand. The next build keeps the tiles you changed.
  5. Don't like the result? One undo takes the build back.

Tip No account needed for the free Autotile generator, which does the same on its own page.

13 tiles you draw
All 47, built for you
Maps

Paint the level right here.

A map is a level built from your tilesets, on the same canvas as the rest of your work. It has tile layers, auto layers and object layers, up to 64 in all.

How to

  1. Press N, choose New image, then Map. Set the tile size, the Map size in columns and rows (40 × 30 to start, up to 1024 × 1024) and a Tileset. Or right-click a tileset and choose New map.
  2. Open the map with Edit map, or select it and press Enter.
  3. Add more tilesets with + in the palette. Take one from the project, choose New tileset, or Import image… to split a pixel-art PNG into tiles.
  4. Choose Add layer… and pick Tile layer, Auto layer or Object layer.
  5. An auto layer places tiles from another tile layer with a rule, Scatter, Edge, Below or Custom. Convert to tile layer bakes it into plain tiles.

Tip Need a different size later? Map size… resizes the map from any of nine anchors.

Painting

Brush, terrain, random.

The tile tools work like the pixel tools. Pick tiles in the palette and paint, fill or stamp them across the map. Pick a terrain and the edges join as you go.

How to

  1. Paint with the brush. Use the eraser, eyedropper, bucket, rectangle and ellipse the same way.B
  2. Drag in the palette, or Shift-click, to pick a block of tiles as a stamp. Cmd or Ctrl-click adds single tiles.
  3. Pick a terrain swatch above Tiles in the palette. The brush, bucket and shapes then paint that terrain with every edge joined.
  4. Mark your own terrains in the tileset editor. Open Terrains, choose Add terrain set and Add terrain, then click tile corners and edges. A 47-tile sheet comes with its own.
  5. Pick several tiles and use Random to paint a weighted mix. Each tile's Probability sets how often it comes up.D
  6. Flip and rotate what you hold.XShift HYShift VZ

Tip Rectangle select and magic wand work on tiles too.

Game data

Collision, animation, spawns and zones.

Tiles carry what your game needs, set once on the tile and everywhere it's painted. Object layers hold the rest, like spawn points, triggers and entities, each with a name, a class and properties your game reads after export.

How to

  1. Right-click a palette tile and choose Tile properties. Pick a Collision preset (none, full, halves or slopes), or Custom to draw rectangles and polygons on the tile.
  2. Switch the options bar to Collision and click cells to turn a tile's collision on or off.
  3. Choose Animation, then Add frames and click the tiles to play. Animated tiles play on the map, in the palette and in the map's thumbnail.
  4. Add an Object layer and place points, or draw rectangles, ellipses, polygons and polylines for areas and paths.PNL
  5. Click or drag an image from the Assets section to place it as an entity.
  6. Give tiles and objects a Class and custom properties (Text, Number, Integer, Bool or Colour).

Tip In the object tools, Rectangle is R and Ellipse is O. Every object key is in the table below.

Export and import

Out to Godot or Tiled, and back in.

Send a map or a tileset to your engine, or bring in a map you made in Tiled or LDtk. Extrude edges is on by default for Godot and Tiled, so tiles don't show lines when the game scales them.

How to

  1. For a map, right-click it and choose Export, or press the key inside the map editor.Command E
  2. Pick Tiled as TMX or JSON, Godot (4.3 or later) or PNG. Object names, classes and properties go with it, and auto layers go out as the tiles they placed.
  3. For a tileset, use the normal Export dialog. Pick Godot for a TileSet with its terrains, Tiled for a .tsx with Wang sets, Unity for a PNG to slice, or PNG.
  4. To import, drop a .tmx or .tmj file on the canvas with its .tsx or .tsj and images. If tileset images are missing, a dialog asks for them.
  5. Drop an .ldtk file and each level becomes its own map.

Tip Tiled imports are orthogonal maps only. Image layers and text objects don't come across, and LDtk auto-layer rules arrive as the tiles they made.

  • Godot.tscnSpriteFrames, scenes and TileSets
  • Unity.asepriteThrough Unity's Aseprite Importer
  • Aseprite.asepriteLayers, tags and timing kept
  • PNG.pngSheet + JSON for Phaser, PixiJS, GameMaker
  • GIF.gifGIF and APNG, scaled
  • Tiled.tsxTilesets with Wang sets
Shortcuts

Faster with the keys.

Brush
B
Eraser
E
Eyedropper
I
Bucket
G
Rectangle
U
Ellipse
Shift U
Random
D
Flip horizontal
XShift H
Flip vertical
YShift V
Rotate 90° right
Z
Rotate 90° left
Shift Z
Select objects
V
Rectangle
R
Ellipse
O
Point
P
Polygon
N
Polyline
L

On Windows and Linux, use Ctrl where you see ⌘.

Keep going

Tools, guides and more

Questions

Before you ask.

What is a 47-tile autotile set?

A 47-tile set, often called a blob tileset, covers every way a tile's edges and corners can meet its neighbours, so terrain joins up without gaps whatever shape you paint.

Can I build levels here, or do I still need Tiled?

You can build them here, with tile, auto and object layers. If your team uses Tiled, export the map as TMX or JSON and keep going there. You can also drop a Tiled or LDtk map in and keep working on it here.

Does it work with Godot 4 terrains?

Yes. The TileSet arrives with its terrains already set, so Godot's terrain painting works straight away.

Can I make RPG Maker autotiles?

The free autotile generator exports RPG Maker MZ and MV A2 sheets, as well as Godot and Tiled tilesets. The editor itself doesn't export RPG Maker.

Can I make isometric or hexagonal maps?

Not yet. Maps are orthogonal, and Tiled imports are orthogonal only.

Your game's art deserves one home.

Open a canvas and draw the first sprite. The rest of the game can move in when it's ready.

Start drawing